articles/Printers/epsongowide-page3

EPSON go seriously wide - part 3 of 1 2 3

by Mike McNamee Published 01/08/2007

Epson Stylus Pro 11880 key features summary:

Professional paper handling up to 64" wide
Consistent output with Epson Micro Piezo TFP™ Printhead Technology
High-density Epson UltraChrome K3™ with Vivid Magenta Ink Technology
Standard USB 2.0, and Gigabit Ethernet interface
Flexible paper handling with roll or cut-sheet media from A3 / tabloid up to 64" wide.
BorderFree™ roll printing from 10" up to 64" wide
Accepts media up to 1.5 mm thick poster board
Productive printing with built-in automatic media cutting system and take-up reel system
Record information about paper with media bar code tracking and identification system
Superior image processing with Epson Super Halftone Screening Technology
Easy to use and maintain with Auto Ink Droplet Detection System
vEpson Micro Droplet Technology

The ability to fire ink droplets in the way that they do is unique to Epson and a remarkable achievement of engineering. The system is based on the piezo electric crystal, discovered in 1880 by brothers, Jacques and Pierre Curie. By one of those quirky coincidences, Epson launched their new baby at the Royal Academy, which is alongside the The Linnean Society of London - Carl Linneaus was one of the early researchers of the topic of piezo effects but failed to unravel its mysteries.

A number of materials flex when an electrical current is passed through them, they are typified by the ferroelectric polycrystalline ceramics, but also includes quartz, topaz, tourmaline and lead zirconate titanate. The latter, for example, changes shape by 0.1% when it is charged. This is exactly the opposite working of your gas lighter. With the gas lighter you flex the crystal by squashing the trigger and the piezo crystal then sends a voltage out of its ends, which is then used to create a spark to ignite the gas. Being an essentially electronic device it can be vibrated by an alternating voltage at rates of 40,000 per second. This pulsating crystal is used to pump droplets of ink at this same rate. The size of the droplet is governed by the amount of displacement that can be induced in the crystal. It is always quite small; the crystal would have to be moving at many times the speed of sound if it had to travel back and forth over a long distance 40,000 times per second.

Herein lay the challenge for the Epson engineers in trying to increase the printing speed of the head. The droplets needed to be kept small to maintain the fine image detail, but making them bigger was a way of getting ink to paper faster. The trick was to pack more of the same size of heads into the same physical space while keeping the operating parameters the same. As the diagram shows, they have managed this. The speed increase at higher resolutions is a factor of 1.6, quite a worthwhile improvement.

Please Note:
There is more than one page for this Article.
You are currently on page 3

• EPSON go seriously wide page 1
  
• EPSON go seriously wide page 2
  
• EPSON go seriously wide page 3
  

Contact Mike McNamee

1st Published 01/08/2007
last update 09/12/2022 14:53:56

More Printers Articles

There are 0 days to get ready for The Society of Photographers Convention and Trade Show at The Novotel London West, Hammersmith ...
which starts on Thursday 1st January 1970